Industrial Plants, especially those that manufacture chemicals, process oil & gas or in other ways store or process flammable and/or combustible materials need various kinds of gas detectors to ensure operational safety. This blog post will give a brief overview of the various kinds of gas detectors used and the technologies behind them.
Gas detectors are mainly used for monitoring the presence (or in some cases, the absence) of gases and vapors. If we classify gas detectors on the basis of the gas being detected, we can classify them into three types as under.
1) Toxic Gas detectors
2) Explosive Gas Detectors
3) Oxygen detectors
Note that we can use the first two types of gas detectors to detect regular gases as well as vapors that are generated by volatile liquids. The third type is generally used to check if a restricted area (also known as a confined space-like the inside of a large storage tank) contains enough Oxygen to sustain a workman who may be present in that area. In applications where Nitrogen blanketing is used to make the vapor space above an inflammable liquid inert, an Oxygen detector can tell us if the vapor space is really inert or not. Thus in these cases, we are more interested in knowing about the absence of Oxygen, rather than its presence.
There are a few major technologies that are in usage today for detecting gases. They are listed below.
1. Catalytic Combustion type
These detectors utilize actual combustion of the gas that is to be detected, on a hot “bead” that is part of a Wheatstone bridge network of resistors. The presence of the gas causes combustion that alters the resistance and thus can be converted into an electrical signal. This is the most common type of gas detector in usage today. The same technology is used in propane detectors.
In this type of gas monitor, the sensor is an electrochemical cell with an electrolyte (which may be in the form of a gel) and two electrodes. The gas that enters this cell undergoes electrolysis and a voltage difference appears across the electrodes, thus generating an electrical signal that can indicate the amount of gas. This technology is used in toxic gas detector, h2s detector and hydrogen gas detector.
3. Infrared Type
These can be point type or continuous (also known as open path). It is well known that each chemical compound absorbs infrared light of a unique band of frequencies. Also the amount is that is absorbed is in proportion to the concentration. This principle is used in infrared type gas detection.
4. Semiconductor type
In this type of gas detector, the sensor is a doped version of Silicon or Germanium, that gets its conductivity altered by the presence of a gas. This principle is used to generate a usable electrical signal.
This is a short overview of the various kinds of gas detectors used in industries and homes today.
